|
Cycle-Rx®, (US Patent # 6,544,349), is a specially formulated,
all-natural metal cleaner designed to thoroughly clean the internals
of your motorcycle engine. Many years of real-world testing have
gone into this formulation.
This product is based on the same proven chemistry as used in Auto-Rx®. Thorough testing of Cycle-Rx® was performed at AMI ( American Motor Cycle Institute) of Daytona Beach, Fl. AMI provided before and after compression test data, as well as used oil samples submitted to Dyson Analysis for review.
Cycle-Rx® extends MTBF (Mean Time Before Failure)
of oil lubricated rotating parts. This is accomplished by making the metal clean for oil to lubricate and do its job. I think this is significant as oil cannot lubricate through dirt or contaminants and skips to the next clean area of metal where there is no dirt. Ccyle-Rx® lets oil lubricate every nook and cranny, reducing metal to metal friction to the minimum. It is this ability that cleans the ring packs, restores compression, improves combustion, and helps keep your motorcycle out of the shop. However I know it does the above. I guarantee it.
Don’t Risk Costly Repairs To Your Cycle's Engine …
Stop contamination at the source NOW with Cycle-Rx®, and save time, money and frustration in the future.
Did You Know …
That 95% of internal engine problems are caused by the build up of such contaminants as carbon, sludge, dirt and third-party abrasives in your engine?
These contaminants enter the lubrication system in the form of blow by gases, and are the catalyst that can cause carbon deposits, sludge, varnish, and corrosive compounds. The bad news is that the contamination process can occur as early as 10,000 miles on the clock. Unfortunately, these deposits will form in the areas of the highest heat, and frictional surfaces, robbing the lubricant of a clean working environment.
“How Cycle-Rx Works”
Cycle-Rx® is a clean as you ride product. Cycle-Rx® is added to the host motor oil and slowly dissolves contaminants from ring packs, cam lobes, and other high friction areas.
Slow methodical cleaning is the desired cleaning mode, unlike old solvent technology that can chunk off contamination deposits (dangerous), and severely impact polymer seal materials. Cycle-Rx® is compatible with all lubricating oils: dino, semi-synthetic, and full synthetics and does not alter your host oil in any way.
Cycle-Rx® is made up of three ester groups. The lanolin ester is the main cleaning agent, its function is to impregnate the surface of varnish and coked up deposits. The second is an aliphatic ester. Its function is to provide for better film forming of the host oil, eliminating the potential of dry spots in the oiling system, during the cleaning process. This component is also very resistant to oxidation and is a supplement to the host oil while the contamination is being removed and deposited to the filtration media. The last ester is a biodegradable, polyol ester, which provides extra, extreme pressure capability to the host oil. Utilizing heat, pressure, and flow, generated within the oiling system, Cycle-Rx® safely and effectively dissolves deposits. Deposits form slowly over time, they should be cleaned slowly and methodically as well.
The combination of esters provide polarity to the host oil, giving the lubricant an attraction to metal surfaces, reclaiming these surfaces from the contamination. Lubricating oils perform well in clean working conditions. Lubricating oils can either lubricate or clean. They can’t do both well. Detergents in motor oils are added to try and maintain a clean system. They do little to nothing on deposits that have already formed.
Cycle-Rx® also cleans deposits from beneath rotational seals, causing no swelling or degradation to the polymer seal material. Cycle-Rx® can effectively slow, or stop, rotational seal leaks in many cases.
Cycle-Rx® is designed to safely turn back the clock on lubrication system contamination. Periodic use of Cycle-Rx will reduce wear and maintain peak performance, by keeping a clean oiling system.
For Mor Information Contact :
Frank Miller
4235 Marsh Landing Blvd #811
Jacksonville Beach Fl 32250
Tel: 904-273-9098
|
